ACS is the competence assessment behind Gas Safe registration, not a course or a level: CCN1 is the domestic core, appliance modules (CENWAT, CKR1, HTR1, MET1, CPA1) sit on top, and you reassess roughly every five years.
ACS assesses competence in gas safety. Here is how the core and appliance modules fit together, what to check with your assessment centre, and how to prepare for the knowledge and practical elements.
ACS is a competence assessment, not a course level
ACS is how a gas operative proves current competence so they can join (or stay on) the Gas Safe Register and work on gas legally. It is separate from Level 2/3 plumbing qualifications — you can be a qualified plumber and still need ACS to touch gas.
CCN1 and the appliance modules
CCN1 (Core Domestic Gas Safety) is the foundation everything else builds on — tightness testing, ventilation, flueing, unsafe-situations classification and emergency actions. On top of CCN1 you take the appliance modules relevant to your work: CENWAT (central heating and water heaters), CKR1 (cookers), HTR1 (fires and wall heaters), MET1 (meters), CPA1 (combustion performance), and so on.
New entrant vs reassessment
- New entrants usually come through a managed learning programme with supervised on-site experience, then sit the assessments.
- Existing engineers reassess roughly every five years to keep their certificates — and the test does not stand still, so brushing up matters even for experienced hands.
Prepare for knowledge and practical decisions
Practise applying what you know: identify an unsafe situation, explain what a test result establishes, and work through a calculation with its units. Use questions and diagrams to find gaps, then revisit the relevant teaching. Practical preparation also needs appropriate supervised training and equipment; a multiple-choice score cannot demonstrate those skills.
What assessment day actually looks like
The exact format varies by assessment centre and awarding body, but the shape is consistent: a written/multiple-choice knowledge element, a practical element on real or simulated appliances and rigs, and often verbal questioning where the assessor asks you to explain or justify what you are doing. CCN1 is the core you sit first; the appliance modules add their own practical tasks on top. Bring your own calibrated instruments if the centre expects it, and check the centre's joining instructions — they tell you what to bring and how the day is structured.
Revise it the practical way
That is exactly what PlumbRevise is built for: exam-style questions, on-site scenarios and the calculations you actually use — starting with CCN1. A solid way to find and fix your weak spots before the day.
Start UK gas exam revision with the free CCN1 questions and answers: work through the explanation after each response, then use the gas mock-test setup to practise with feedback at the end. If you are also taking an appliance assessment, use the ACS module guide to identify the additional topics. A good score on core gas questions does not check every appliance subject.
Quick answers
What actually happens on ACS assessment day?
You work through a mix of a written/multiple-choice knowledge test, practical tasks on appliances and rigs, and usually some verbal questioning from the assessor. The precise running order, timings and which modules you sit on which day are set by your assessment centre, so the single best move is to read the joining instructions they send — they spell out what to bring (often including your own calibrated gauge and analyser) and how the day flows.
How long does the full domestic gas ACS take?
For a new entrant, the full initial domestic ACS — CCN1 plus the appliance modules like CENWAT, CKR1, HTR1 and MET1 — is normally delivered over several days rather than one sitting, because each module has its own practical tasks. A reassessment for an existing engineer is much shorter, often one or two days, since you are only re-proving current competence. Your centre will confirm the exact schedule for the modules you are taking.
What is the pass mark for CCN1 and the ACS modules?
ACS requires you to demonstrate the performance and knowledge criteria for the modules you take. Ask your approved assessment centre for the current requirements for each element. PlumbRevise self-test targets are practice feedback; they are not ACS pass marks and do not replace a knowledge or practical assessment.
How many times can you resit CCN1 or an ACS module if you fail?
If you fail an element you can normally resit it, and you often resit only the specific part you failed rather than the whole assessment — but the number of attempts allowed and whether any re-training is required first are set by the assessment centre and awarding body, not fixed nationally. Ask your centre what their resit policy and any additional cost is before the day, so a fail is a setback rather than a surprise.
If I fail one appliance module, do I lose the whole ACS?
Not usually. The appliance modules (CENWAT, CKR1, HTR1, MET1 and so on) are separate certificates that sit on top of CCN1, so failing one appliance module does not automatically void CCN1 or the modules you passed. You cannot hold the appliance certificates without a valid CCN1, though — CCN1 is the core the rest depend on. Confirm exactly how partial passes are handled with your centre.
How long is ACS valid before you have to reassess?
ACS certificates are typically valid for five years, and you reassess before they expire to stay on the Gas Safe Register. The assessment does not stand still between sittings, so even experienced engineers should brush up on current standards and the unsafe-situations procedure rather than assuming a reassessment will be a formality.
Something wrong, unclear or out of date? Report an issue with this guide.